PROCNT013 Promotional Stand Setup Instructions

Remove the components from the included carrying bag. The kit should include 3 wooden
counter pieces, aluminum legs, and one long piece of aluminum siding.



Start by attaching the legs to the wooden base; the base will be the piece with rubber feet on the bottom.
Screw the legs into the holes in the base. On each leg, you will see a piece of plastic that is designed to
support the inside shelf. You can attach the legs so this shelf is placed closer to the top or bottom. Below you
will also see a picture of the support brace which holds the legs together and keeps the display stable.




Slide the middle shelf over the legs as shown above. There are holes in the shelf to line up with the legs.



Next, unwrap the piece of aluminum siding.



Insert the aluminum siding into the track in the base and wrap it around the display. Make sure the
aluminum sits securely in the track or the top counter will not attach correctly.



Attach the top counter by lining up the aluminum siding with the track in the wood. The holes in the top
counter should line up with the legs. Screw the legs into the top counter as shown above right.