Assembly: OVTHD635 Trade Show Table Header

Uploaded on 27 May, 2015

Assembly for OVTHD635 Trade Show Table Header

Turn one aluminum frame into 6 different trade show table headers! Each exhibit stand adjusts easily from 6' wide to 8' wide and attaches to tables or can stand on the floor by itself. Pair with custom graphic table cloths and banners, then prepare to wow at your next trade show event. Assembly of these table headers is quick and easy, just click the aluminum tubing in place following the simple number system.


BECCA (Narrator): "Setup and break down is a pinch.  Simply use the labels on the end of each aluminum tube and click into place the matching numbers in a sequential order. The bottom corners - numbers 1 & 4 - don't click into place but instead must be secured with screws. Once the frames tubing has all been connected, attach the stabilizer legs. Then you can put the banner on over the frame and zip it tight.  If you'd like the banner frame to remain floor standing, you're good to go.  If you want to mount the backdrop to a table, place the banner on top of the table with the stabilizer feet in the center of the table's shot sides.  Then, put the aluminum c-clamp over the feet of the stand with the screw knob located on the underside of the table. Then, tighten the knob until the banner is securely mounted."

TEXT: "Check out all 30 of the Products in the OVTHD Series of Tradeshow Headers and Backdrops..."