| Lightbox
Technology Diffusion Patterns & CNC Engraving |
| |
| Edgelit
lightboxes on the market today use several types of bulbs (CCFL, LED T5), however,
without a tested and developed light diffusion method any bulb would be considered
worthless. This "light diffusion" is a method that transmits the brightest
light found near the edges (near the bulbs) to areas of the light box that have
the least amount of light (the center of the panel) in an even pattern of distribution
(all areas of the panel are the same). Alternative patterns - those preferred
by us - transmit slightly more light to the center of the panel, which is the
central focus point for viewing graphics, and slightly less light to the perimeters
or edges of the panel. To transmit more light to the center of the panel and less
to the perimeters is technically more difficult than to distribute light in an
even pattern, but again, this is preferred by us. This whole concept of diffusing
light away from the light source (lamps) resolves the traditional light box issue
of having "hot" and "cold" spots or "shadows" where
the fluorescent tubes were and were not placed. There are 3 basic methods of diffusing light from the bulbs, and within each technique there is a lot of room for variation. To date, the three methods of diffusing light are printed patterns, CNC engraving, and most recently, a light diffusing acrylic. Our tests have generated qualified printed and CNC patterns that can transmit enough LUX (brightness) to meet our standards, but almost all homogenous acrylic methods have, so far, failed our LUX standards. A truly high-quality lightbox has an efficient diffusion pattern giving either, 1) an even glow throughout the panel, or 2) one that transmits more light to the center of the panel. A light box purchaser needs to be aware of many fake manufacturers, or manufacturers making false claims about how their lightboxes are "homogenous" or utilize diffusion patterns (see the comparison images). Many of these 2nd tier manufacturers take short cuts, in many cases to avoid existing patents, and print or engrave a pattern in the acrylic panel that has no logic to it. Their patterns do nothing to transmit or diffuse the light in any logical manner. It is just a grid or pattern put on the acrylic to fool the consumer into thinking it is a technically advanced lightbox. We have seen countless samples whereby there is a straight grid pattern (which is no pattern) imprinted in the acrylic. We scratch our heads saying to ourselves, "what are these guys thinking, what is the purpose of this pattern?" A true light diffusion pattern will not be "uniform", but an irregular pattern calculated by algorithms that take into consideration the area of the panel, the distance between lamps, the thickness of the acrylic, and the wattage of the lamps. Most of these algorithms and techniques are patented. Examples
of real light diffusing patterns: A printed diffusion pattern is farther spaced
out at the edges (closest to the bulbs) and is tighter at the center where more
surface area needs to get light. Examples of
fake light diffusing patterns that do not achieve the goal. There is a delicate
balance when plotting out the pattern so as not to create hot or cold spots which
can be measured with a LUX (or light intensity) meter. We tested several lightboxes,
with very stringent restrictions, and the lightboxes that we have chosen showed
amazing brightness levels combined with an even disbursement of the light. Beware
of vendors selling imitation patterns. Our products are the real deal and we are
sure you'll be happy with their performance! |
