TEPAL - 10' Trade Show Display
Set up In Minutes!!
Large black carry case has wheels that make transportation easy.
1. The large black carry case is held together using blue Velcro straps.
2. Remove the center base section of the display from the case
Begin setup of center section with the Four Panel Base
3. Insert stacking
guides in all sections of base panel.
4. With
the base section in place, lower the upper portion onto base.
5. Swing
sides forward.
The blue carry case holds all 4 column pieces, this case may be either carried with a soft shoulder strap or pulled by the handle, this case also has wheels for easy transportation.
6. Start with the column pieces flat.
7. Roll the flat flexible panel into a column shape.
8. The magnets along the vertical seam "snap" together to make
the flexible panel round.
9. Insert the round panels into each column to offer additional support
for their shape.
10. Now the bottom column is ready to be attached to the rest of the display.
(Note: Columns slide onto the panels with a at the U-Channel.)
11. Next, place the top column piece onto the bottom, guiding the square pins into the square channels to hold in place to keep the columns aligned.
This display can be set up for tiled graphics or poster frames and literature pockets
Remove the base section and columns and use this display as a table top unit
Add-on materials come with Velcro that sticks right to display.
Please call 1-800-572-2194 or e-mail us at info@displays2go.com with any questions regarding this or any of our trade show displays.