TV Stand with Rotating Bracket Fits Monitors 32”-70” - Black

110 lbs. Capacity Exhibition TV Stand
  • Fits 32”-70” Screens
  • Max. Weight Capacity 110lbs.
  • Rotating Bracket
  • Heavy Duty Base
  • Max. VESA Capability 600x400


Order before 3PM ET and this item will ship today.
$312.99 / Each (USD)


Exhibition TV Stand with Rotating Bracket

This exhibition TV stand fits monitors and plasma LCDs between approximately 32” and 70” weighing less than 110 lbs. Weighing a total of 102 lbs. itself, the heavy duty floor standing bracket is a durable design constructed of steel. Built-in cable management helps to hide unsightly wires inside of the column of the monitor TV stand. The double pole design holds a sturdy bracket that rotates 360 degrees to flip a plasma LCD from portrait to landscape in seconds. This TV stand has a maximum VESA capability pattern of 600x400 to hold larger models. The flat base provides mounting holes to bolt the unit into the floor for security in public settings.


GTIN 840844127569
Overall Width x Height x Depth 29.0" x 91.0" x 28.0"
Base Width x Depth 25.0" x 28.0"
Weight 102.0lbs
Material Steel
Placement Style Floor Standing
Orientation Portrait, Landscape
Color Black
Monitor Size Range x (inches) 32" x 70"
Bracket Height Range, (inches) 51.0, 80.0
Mounting Bracket Width x Height x Depth 24.0" x 17.0" x 5.0"
VESA Size 200x100, 200x200, 400x200, 400x400, 600x400
Bracket Type Rotating
Max Monitor Weight 110.0lbs

Ordering Information

In Stock
Order by 3PM Eastern Time US for same day shipping.

Resources: Manuals, Videos, & Templates

Download DSTANDBK Instruction Manual

Filename: dstandbk_instruction manual.pdf (342.19 KB)

Download DUOPOLEBK_Bracket

Filename: duopolebk_bracket.pdf (988.50 KB)


Browse reviews from customers who have already purchased this product.

Overall 3.45 out of 5 | 11 reviews

Customer Photos & Videos

Customer Photo 1

1 / 5
Sturdy but rotating bracket is not
By Daniel on February 18, 2019 Verified Purchase
The mount is really sturdy but the rotating bracket is really too weak for this mount to be useful... It is relying on a tiny spring mechanism to hold the screen at a different angle by pushing a metal piece into holes at different angles (0, 90, 180, 360). Also, it will be even worse if your TV weight equal on both sides. Had to return it since it does not hold my TV vertically... Do not recommend unless you have a very small TV and it should work...
Comments (1)
Hi Daniel! Thank you so much for taking the time to share your feedback. We're so sorry to hear that this TV stand did not meet your expectations. We'll certainly send your thoughts along to our product development team for review, and have our customer care team reach out to assist. Thank you for bringing this to our attention.

Posted one month ago by Displays2go

5 / 5
Does the job well
By Steve on January 31, 2019 Verified Purchase
(I'm a mechanical person) Unit assembled almost without instructions. Sturdy and did the job well. I think the trick to getting the TV level is: When you slide on the mounting bracket to the poles, and attach the mounting plate to the bracket, let ALL the screws loose until you ensure the bubble level in the front is, in fact, level. Then tighten the all the screws. Letting everything loose will give significant "play" in the hardware to get it level and then tighten. The only issue is one of the holes for the screws on the vertical connector pipes was too large so the screw could not be tightened. I don't think this was a big issue. I saw another person asked about a shelf. Is it possible to buy a 2nd mount? I don't need the whole TV bracket, but with this mount is has 4 threaded mounting points and one could easily attach a shelf or other item. Spring-ball should be replaced with a thumbscrew. Will most likely be buying another.
Comments (1)
Hi Steve! Thank you so much for taking the time to write this review. We greatly appreciate your feedback and recommendations, and we'll certainly forward this along to our product development team to see how we can improve the assembly experience for others. While we do not a separate mount for this stand listed on the site, you may be able to purchase an additional mount by contacting our customer care team directly. We'll have a customer care specialist follow up with you shortly to assist. Thank you again!

Posted one month ago by Displays2go

2 / 5
Too Heavy
By Jessica W. on August 8, 2018 Verified Purchase
I was on the hunt for a TV stand for our trade show booth, something to hold flat screen above a 6 foot table. Unfortunately it was too heavy for one person to set up.
Comments (1)
We're sorry to hear that this TV stand wasn't what you expected, Jessica. A customer care specialist will be reaching out to see if we can assist in finding you a better solution. Thank you for letting us know.

Posted 7 months ago by Displays2go

2 / 5
Sturdy except for the rotating mount
By Jeff B. on May 24, 2018 Verified Purchase
The stand is really sturdy, but the mount allows you to rotate the display every 90 degrees using a detent and interlock mechanism. The spring on that interlock mechanism is inadequate and would not hold the display in position. I would not buy again.
Comments (2)
Hi Jeff. Thank you for your review. We definitely want to look into this further for you and see if we can assist. A customer care representative will reach out shortly. Thank you!

Posted 10 months ago by Displays2go

This is my experience as well. It wont lock and stay level.

Posted 2 months ago by Jameson Z.

2 / 5
By Paul on October 11, 2017 Verified Purchase
I purchased 3 of these Only one of the three will lock into position, and that one is hit or miss. We have tried 40", 55" and 70" TV's. All new and relatively lightweight . It's pretty embarrassing to set up equipment and then have to use zip ties and duct tape to keep the screen level ....really disappointed . They look good and are stable - but when you're in the AV business its the little things that count. And I need 10 more stands...back to the endless search I guess...
Comments (3)
Hi Paul, We understand your frustration and we're sorry you had to experience that. This is something we can certainly rectify for you, so one of our customer care specialists will reach out promptly to assist. Thank you for your patience.

Posted one year ago by Displays2go

Aren't there set screws to adjust?

Posted one year ago by Thomas M.

I haven't found any set screws. It's a nice stand except for this one small, but major, flaw.

Posted 2 months ago by Jameson Z.

View All 11 Reviews For DSTANDBK


prop 65 warning WARNING: This product can expose you to Nickel Compounds, which is known to the State of California to cause Cancer. For more information go to

Questions & Answers

Adding to cart...