4’ x 6’ Outdoor Banner Frame with Hinged Edges, Stretching Clamps - Black

4' x 6' Black Banner Stretching Frame for Wall Mounting

This 4’ x 6’ black banner stretching frame can display graphic imprinted on plastics, sheet metals, and vinyl while concealing both raw cut edges or sewn hems. The well-engineered clamps with teeth are designed so they do not rip or tear the artwork and can be screwed tight to pull the edges taut. Ordinary methods for outdoor print mounting allow wind to inflate and flap the artwork but the large format banner stretching frame does not require pole sockets therefore preventing wind from reaching the graphic. Flags that are screwed directly into brick walls of buildings require re-drilling new holes. Using the display requires installation only once with the ability to use successive, same-size banners thereafter. Unsightly mounting hardware including the clamps, connector pieces, and holes are hidden by the sleek design of the large format snap cover of the banner stretching frame. Sections of the enclosure arrive unassembled but installation is easy by simply connecting the corners of the framework and inserting the print following the instructions described in the installation manual.

• Price includes pre-built frames, corner hardware, and stretch clamps.
• Wall-mounting fasteners are included.
• Your frames are packaged for FREE GROUND shipping in the Continental U.S only. AIR shipping not offered.