Nice design made difficult to assemble
The assembled unit looks nice and is very sturdy, however: 1. I have a lot of experience assembling a variety of things. I was a helicopter mechanic for years. The assembly process for connecting the shelves to the posts is ridiculously difficult, especially for one person. I suggest you use a bit of masking tape to secure the bolt to the allen wrench. Otherwise you are going to need a small magnet to retrieve the dropped screws out of the tube. You can forget about easy assembly and disassembly. It would be relatively easy to change the design so that there is a tube to slide the bolt through. Instead of two bolts, use a bolt with a hand knob and have a locator pin on the shelf bracket to replace one of the bolts. 2. The small hole plugs fall right out. 3. The carton is not robust enough for the unit. Mine arrived with a hole in the end where the upright tried to exit the carton. 4. The instructions need a lot of work.
good, strong, stand
This stands works well in a gallery setting. It is simple and does not take up a lot of space. Only warning, it does have a front to back orientation. The longer legs must be in the front. It was probably in the instructions but our installers missed it. I have always gotten gotten good service and quality products form Displays To Go.
City of SJC Review
Overall a good purchase, however the product came with no instruction manual, the mounting screws were too short and the flat round plugs that were to cover the holes on the sides of the cart don't stay in. Our handy man had difficulty mounting the sides of the cart to the DVD tray.