All Customer Reviews For IPGLXFLRA1

By Debbie A. on April 3, 2022 Verified Purchase

We're sorry we didn't deliver a 5-star experience, Debbie! We'd love to hear what we can do better. Let us know!

Posted one month ago by Displays2go

By Renata A. on October 5, 2021 Verified Purchase

Thanks for the 5-star rating, Renata!

Posted 7 months ago by Displays2go

1 / 5

Disappointed.

By Wes R. on May 24, 2017 Verified Purchase

I did not like these iPad stands at all. The base was great- all steel and very supportive. However, the iPad casing was terribly designed. It was all a very cheap plastic housing. You can secure it by screwing in 8 screws from the back, as well as by popping it into place. However, once popped in, it is very difficult to pop back out. I thought I was going to break it, because again, it is all cheap plastic. Also, the advertisement says it can be a floor or counter stand. However, there was no way that I could figure out to mount the base to the part that would make it a counter stand. I was very disappointed with this purchase, and returned it within the week. Why make the iPad housing out of cheap plastic? Why advertise both floor and counter ability when it is not. Very disappointed.

Comments (3)

I have this set too. The plastic cover you can use a little more strengh to pop back it won't break. The cover have to be tight otherwise the tablet not secure enough I think. And about turn floor to tabletop one you can just remove the straight tube and install the bended tube directly to base. It is also no problem. Hope my suggestion helps.

Posted 4 years ago by Ron J.

Thank you, Ron for assisting a fellow customer! You are correct about the tight fit and the installation for countertop use. We hope your stand is working out well for you.

Posted 4 years ago by Displays2go

Hi Wes, We're sorry you were disappointed in your purchase. We're always trying to find ways to improve our products so feedback is so helpful and important to us. We've sent your feedback to our team of customer care specialists and they will reach out shortly to discuss. Thank you!

Posted 5 years ago by Displays2go

Great iPad/Tablet Stand

By Allison K. on March 14, 2017 Verified Purchase

This is a great product. The stands are easy to assemble and I love that you can use them with iPads or tablets

Thank you for the feedback, Allison!

Posted 5 years ago by Displays2go

4 / 5

Using it for Insignia 10" tablet

By Andre Petric on February 7, 2017 Verified Purchase

The stand seems fine. We had to customize the foam padding very slightly to fit the Insignia. Only stand we were able to find that came close to fitting the Insignia.

Disappointed All Around

By Edward P. on May 18, 2018 Verified Purchase

This product is clean and looks great. However, it is awkward, complicated, and time consuming to put together. Also, it is unstable and wobbles once put together. I would not buy this product again. In fact, I choose another product and am much happier.

BOOM! Just stepped it up a level

By Ryan D. on March 7, 2017 Verified Purchase

Purchased this stand for a startup event and it instantly gave our booth an extra element of professionalism that you might not expect from a new company. It was pretty easy to set up and like that it has different inserts to accommodate different sized tablets. The cover did arrive with a scratch but the customer service team sent out a replacement part in no time. Couldn't be happier with this purchase!

Sturdy and Easy to Assemble!

By Rita K. on May 4, 2018 Verified Purchase

I purchased two for our tradeshow booth. They were easy to assemble with clear instructions. They are very contemporary and streamline which coordinates perfectly with our booth design. I like their sturdiness, so they will not be easy to knock over. The display is at a comfortable height for booth visitors to stand and view our presentation. The only issue I had was fishing the power cord through the tube. Our simple solution, tying a string around the cord and pulling it through, worked like a charm.

Ingenuity at its finest, Rita! We're loving your review... So many great features! Thanks for sharing :)

Posted 4 years ago by Displays2go

4 / 5

Good iPad / Tablet Stand

By Franco N. on March 2, 2017 Verified Purchase

Top is plastic, stand is metal. Solid stand. Plastic does have a bit of give. 8 Screws to remove iPad.

4 / 5

Dang for your buck

By Vision lounge sc on November 14, 2016 Verified Purchase

This product shipped quickly and definitely does the job I feel like there were a few screws missing and I had to add some of my personal but other than that the product works great I don't have any issues with it it looks very nice and high quality

Exceeded expectations

By Glenn Arnold on April 15, 2016 Verified Purchase

Great item and perfect for our application. Very solid construction and easily assembled. Arrived missing a part and customer service sent the part immediately. Received excellent customer service on the phone and live chat. Very satisfied and highly recommended.

Hi Glenn, Thank you for your review. We are glad you had a positive experience with us.

Posted 6 years ago by Displays2go

Unstable, wobbles when typing.

By Joe Russell on October 4, 2017 Verified Purchase

While we were optimistic that a $117 tablet stand would be sufficient for our needs, the reality is it's low price comes with limited quality in it's design -you get what you pay for. First clue was with the housing bezel, very cheap plastic that feels as if someone could pry the iPad out with very little tension just with their fingers. Once we set it up, it looked just okay -not great. But once we started using it, that's when we noticed that when typing on the surface it vibrates and wobbles to the point that it's distracting to the user. Yes, we double checked the tension on all the bolts/screws.

Hi Joe, we're sorry that the iPad stand didn't live up to your expectations. A customer care specialist will reach out to you to discuss your experience.

Posted 4 years ago by Displays2go

Great concept, but could be improved

By Beth D. on June 10, 2016 Verified Purchase

I ordered two of them. One was great and the other has had issues. Cannot get it to tighten up and remain solid. You have to be very careful when moving it. Running the lightning cables through each neck and post was very difficult because of the inner connectors and breaking it down from a floor model to a table top is not as easy as it sounds. In addition, the Ipad is completely enclosed in a case that is screwed shut, so be aware that each time you want to turn it on or off, make changes to the settings, program, etc. you have to unscrew up to 8 screws on the back. There is no home button access when it is encased. Would be great if you could put it in the case and leave it. Will definitely buy the next cases with a hinged cover and lockable devise on the unit to make it easier to access it on a regular basis.