All Customer Reviews For DRTV3260SV

2 / 5
Just Okay...
By Chris on February 19, 2020 Verified Purchase
The overall quality of the display is great, and the "trap door" at the back with the power bar is fantastic. Easy to put together and arrived sooner than expected. Sadly, the way the TV mounts are designed to sit flush with the top of the stand, there is NO space for cords depending on where they sit on the back of your display, so we will have to drill out a giant hole and re-manufacture the mounting bracket to be able to use this display. This could be resolved with a more "open" design in the Vesa mount. Also, if you are using a non-standard configuration (like 400x200) this mount, and thus the display, will be useless. Great looking and nice finish, just wish that more thought had gone into the design.
Comments (1)
Chris, thank you for taking the time to share your feedback with us about our TV stand. We're glad that the quality of the display met your expectations, but we're sorry to hear that you experienced difficulties when it came to cable management. The location of inputs vary depending on which TV you have — if your inputs are on the side or bottom of the monitor, you should be able to mount on this stand without an issue. If they're centered in the back, you may experience some difficulties as you've described. We appreciate your input on this, and we'll certainly pass your feedback along to our product team to review for improvements. Thanks again!

Posted one year ago by Displays2go

4 / 5
Straightforward and works
By Michael S. on September 12, 2017 Verified Purchase
Easy to assemble with good stability. I'm using a 22 inch touch screen and there's just a slight wobble if someone taps the screen hard.

4 / 5
display stand review
By Nancy G. on August 6, 2018 Verified Purchase
We are using this display stand for an all-in-one computer for a kiosk. It looks great and will work for our purposes. There are two design flaws: first, when using the 100 Vesa mounting plate, the screws interfere with the sliding mount and second, the mounting plate covers the cable channel for the power cord which pinches any cords running through the slot. To compensate, we had to wedge something between the plate and the stand so the cords weren't pinched.
Comments (1)
Thank you for your review, Nancy. We appreciate the feedback and will pass this along to our product developers for review.

Posted 3 years ago by Displays2go

2 / 5
Functional, but with some minor design flaws
By K. Cole on October 31, 2016 Verified Purchase
The stand looks great, and is sturdy enough for the 23" All-In-One we mounted. The assembly instructions lack enough information. I had to figure out on my own which screws were used to put the stand together, and which screws were used to attach the mounting bracket to the back of the monitor/computer. There's a hole in the top of the stand to feed the power cord down, but the mounting plate covers that hole. I had to feed the power cord before mounting the display, and the cord makes an awkward bend and is squeezed tightly by the mounting bracket. The "easy mount" bracket is not very easy, as the screw heads that attach the bracket to the device interfere with sliding the bracket onto the stand. I had to leave off the washers for the two lower mounting screws, just to have clearance to mount. When I figured all of that out - the stand works, but those design elements could be improved.
Comments (1)
We are sorry that you were not fully satisfied with your item. We will take your suggestions and forward them along to the appropriate department. If you have any further issues or would like to discuss potential return, feel free to contact our customer care team and they will be happy to assist you.

Posted 4 years ago by Displays2go

Adding to cart...