Assembly for MBTVSBKBV2 TV Stand

Transcription

00:00:00:00 - 00:00:06:12
V3, Text 01 
MBTVSBKBV2

Assembly Video

00:00:05:15 - 00:00:13:01
V2, Text 01 
First, set up your instructions and parts in an area

that you that you can easily access them.

00:00:13:01 - 00:00:25:06
V3, Text 01 
Flip the base over and insert the caster posts (B)

into the threaded holes and thumb-tighten. Fully tighten each caster using the wrench,

then flip the base back over.

00:00:25:06 - 00:00:34:07
V3, Text 01 
Optional Tip: Push the brake down to the OFF position

on all 4 casters (B) to prevent movement. 

We recommend locking the casters during assembly.

00:00:32:20 - 00:00:42:08
V6, Text 01 
Next, place the dual poles (C) on the base,

aligning the 4 holes on the dual pole plate

with the 4 outer holes on the base.

00:00:42:08 - 00:00:52:22
V4, Text 01 
Secure screws (M) and washers (N) through the plate

down into the base. Tighten with hex wrench.

00:00:52:22 - 00:01:05:22
V4, Text 01 
Now use the hex wrench (Q) to remove screws and washers.

Pull the inner pole upwards and align the inner notches,

then reinsert the screws and washers and tighten

with the hex wrench. 



00:01:06:01 - 00:01:15:13
V6, Text 01 
Place bracket arm (E) onto the pole. Align the screw holes

and insert hex screws. Tighten screws with hex wrench,

but do not fully tighten yet.

00:01:14:01 - 00:01:21:22
V7, Text 01 
OPTIONAL: Add vertical arm extenders (F) with screws (K)

and washers (J & I) to accommodate

larger size monitors. 

00:01:21:03 - 00:01:29:20
V6, Text 01 
Use the compatible screws and optional spacers

to add the VESA mounts to your monitor.

Not all of the hardware will be used.

00:01:29:02 - 00:01:35:15
V3, Text 01 
Add OPTIONAL horizontal arm

extenders to the mount to fit larger monitors.

Use spacers as necessary.

00:01:35:10 - 00:01:47:00
V4, Text 01 
Carefully lift your monitor and insert the 4

hex bolts (O) into the slots of the bracket arms

and hang.

00:01:47:21 - 00:01:59:01
V4, Text 01 
Drop your monitor’s power cable and any other cables

into the poles and out through the cable management

slot at the bottom. Connect the cap pieces together

around the cord.

00:01:57:12 - 00:02:06:15
V3, Text 01 
To adjust the tilt, loosen the hex bolts

on the arms with the wrench (R)

and slowly tilt the monitor into position.

00:02:07:17 - 00:02:15:23
V4, Text 01 
Congratulations!  You have now set up

your TV Mount!  To find out more visit

Displays2go.com.