Assembly: TEHU6 Tabletop Display

Uploaded on 22 August, 2016

Last Modified on 16 December, 2024

This step-by-step video guides you through the assembly process for your TEHU6 tabletop display. No tools required for this simple and user-friendly setup. Just pop open your frame, lock into place with a few snaps, attach your graphic, and you’re ready to go with your tabletop display. Watch this clip and learn some tricks to make your assembly easy and painless!

Transcription

NARRATOR: “The Hopup tension fabric display is a simple, versatile display that can be set up in seconds. 
Start by stretching your frames sides by gently pushing out the corners.
Next, make sure your purple locking arms are aligned. If not, adjust that they snap together easily. Push on the top of the frame to lock the arms into place.
If your graphic has end caps, gently pull so that the Velcro edges attaches to the grey hub. Repeat for other three corners. Your graphic should be taut.
For frames over 3 quads high, stabilizing feet attach simply. Turn your display on its side and slide the stabilizing feet onto the dovetail clips on the bottom hubs.”

TEXT: "Hopup Tension Fabric Display Features: 
Fast, stylish and highly portable
Lightweight collapsible silver frame
Pre-attached, easy-to-change Velcro fabric graphics
Over 17 sizes available
Curved, straight and backlit options
Stabilizing feet included on all units 3 quads/89" high
Rolling carry bag included
Lifetime hardware warranty against manufacturer defects."