TV Wall Mount w/ Articulating Arm, Fits Monitors 42”-90”, Tilting & Rotating - Black

This unit went together extremely easy. All screws, washers etc are clearly labeled in individual plastic pockets. One part attaches to the wall. The other attaches to the TV. The the TV is simply hung on the part that was mounted on the wall. The wall mount is very strong and allows a great deal of flexibility in the positioning of the TV. In our case it allowed the TV to fit in a corner of the room with it positioned diagonally for great viewing. The rotational component ensured the TV would appear to be level.

The pricing and availability of this product was very appealing, not to mention the ability to extend and swivel. I ran in to 2 challenges during the install: 1) I wanted to center the mount on my wall but because the mount needed to be attached to 2 adjacent wall studs, which were not centered, I opted to attach a mounting board first. The board, 36" long, actually attaches to 3 studs. I then attached the bracket to the 1" mounting board using Ten 1½" Lag screws. I probably over-did it on the lag screws but did not want to take any chances when I upgrade to a larger TV. 2) When I went to slide one of the adapter plate rails into the Adapter bracket "slots" I found that the welded piece was slightly deformed and I could not insert the rail arm. With some tools, I was able to widen the "slot" slightly and was able to get the bracket installed properly. It is solid and sturdy and went together easily. I would definitely buy this again and do recommend to others.

Worked as described....full motion. Made of strong, heavy metal. Very happy with it.

I searched and searched until I found this product. This is the only reasonably priced wall mount with a swivel from landscape to portrait, that can be changed on the fly without having to loosen anything, and can extend out to 31". I say reasonably priced because all the other mounts that had similar features were over $300 from other distributors. The landscape to portrait feature is solid. At first when i tried to rotate it by hand it seemed to me that I had to loosen and tighten the bolts every time, but once I got the TV mounted the extra leverage it provided was enough to rotate it without issue. The TV also stays in whatever rotation you leave it at without drifting, even at 45 degrees if you wanted. The wall mount itself is quite heavy and very well built. Once it was secured to the wall I was able to lift myself off the ground while hanging on the arms about halfway extended.

This mount is as advertised. I have an older 65-inch flat screen that weights 100 lbs. TV is installed on the back wall of a 24 inch recessed entertainment niche. Mount extends the full distance without any sag. Two reasons I did not give it 5 starts. First, the directions did not identify the correct attaching hardware. The directions said to use one set of bolts which did not fit the holes. Had to use trial and error to identify the correct hardware. Second, the mounting plate that attaches to the TV is supposed to have 4 threaded holes to attach the TV to the mounting plate. The holes were not threaded. I had to go the the hardware store and buy a tap drill bit and thread the holes myself. Once installed, the mount works great.